توجه: محتویات این صفحه به صورت خودکار پردازش شده و مقاله‌های نویسندگانی با تشابه اسمی، همگی در بخش یکسان نمایش داده می‌شوند.
۱Large Eddy Simulation of GDI Single–hole and Multi–hole Injector Sprays with Comparison of Numerical Break–up Models and Coefficients
اطلاعات انتشار: Journal Of Applied Fluid Mechanics، نهم،شماره۲، ۲۰۱۶، سال
تعداد صفحات: ۱۰
In the present study the fuel spray of a gasoline direct injected engine with multi–hole injector is simulated. Simulation inputs data, injection flow rate and spray cone angle are obtained from previous experimental studies. Log–normal distribution with different standard deviation is used for initial droplet size as the primary break–up model in order to reach the agreement between experimental and calculated spray tip penetration. As the first step, only one plume of spray injected into a quiescent air environment is simulated and validated by varying break–up model and standard deviation. Then, with coefficient obtained from the single jet simulation all six spray jets are simulated based on the injector nozzles geometry. The comparison between single–jet simulation and multi–jet simulation shows that validated model coefficients for the single–jet spray cannot be used for multi–jet spray simulation without significant modifications due to adjacent jet interaction and pressure drag. A set of new coefficients for the multi–jet spray is presented.
نمایش نتایج ۱ تا ۱ از میان ۱ نتیجه