توجه: محتویات این صفحه به صورت خودکار پردازش شده و مقاله‌های نویسندگانی با تشابه اسمی، همگی در بخش یکسان نمایش داده می‌شوند.
۱Improving the Technical Characteristics of asphalt Pavement with the use of Wastage of Disposable dishes
اطلاعات انتشار: نهمین کنگره بین المللی مهندسی عمران، سال
تعداد صفحات: ۸
In this project, PS–prepared mixtures' mechanical properties will be compared with the control sample. In this study, parameters such as bitumen’s penetration degree, softening point and ductility and marshal stability, marshal flow, marshal ratio (stability\flow) and asphalt specific gravity will be investigated. PS materials are used in four methods too: 1added to bitumen bitumen replaced with PS,3–added to aggregates & 4– one–sized soft aggregates replaced with PS. More disposable dishes make from PSis not usually polar and has no affinity toward absorbing and reacting to water, it is a hydrophobic combination and forces the water off the surface. Therefore, PS can dissolve major problems of water penetration and drainage in asphalt surfaces. Therefore, obtained asphalt mixture has more strength and resistance to control sample. Thus, while using obtained mixture improves asphalt mixtures properties and reduces the consumption of aggregates, it spend large amounts of PS wastages in civil engineering constructions.<\div>

۲Making Flexible Pavements with the use of Waste Disposable Dishes
اطلاعات انتشار: سومین کنفرانس بین المللی حوادث رانندگی و جاده ای، سال
تعداد صفحات: ۱۲
In this project, PS–prepared mixtures' mechanical properties will be compared with the control sample. In this study, parameters such as bitumen’s penetration degree, softening point and ductility and marshal stability, marshal flow, marshal ratio (stability\flow) and asphalt specific gravity will be investigated. PS materials are used in four methods too: 1–added to bitumen, 2–bitumen replaced with PS, 3–added to aggregates & 4– one–sized soft aggregates replaced with PS. More disposable dishes make from PS. Since PS is not usually polar and has no affinity toward absorbing and reacting to water, it is a hydrophobic combination and forces the water off the surface. Therefore, PS can dissolve major problems of water penetration and drainage in asphalt surfaces. Therefore, obtained asphalt mixture has more strength and resistance to control sample. Thus, while using obtained mixture improves asphalt mixtures properties and reduces the consumption of aggregates, it spends large amounts of PS wastages in civil engineering constructions<\div>
نمایش نتایج ۱ تا ۲ از میان ۲ نتیجه